The “web menu” interface
is defined in the help section titled
“Web
Menu Interface”.
The other approaches are defined below.
WAP Configuration OTA –
URL Parameters
Using the WAP Configuration OTA URL
parameters requires a good understanding
of the Nokia/Ericsson OTA Specification.
This document specifies the mapping
of gateway URL parameters to OTA setting
parameters. The value provided for
the gateway URL parameter is applied
to the corresponding OTA setting parameter.
Please refer to the Nokia/Ericsson
specification for documentation of
the OTA setting parameters.
OTA_BEARER –
maps to TYPE=ADDRESS, PARM NAME=BEARER
OTA_PPP_AUTHTYPE
– maps to TYPE=ADDRESS, PARM
NAME=PPP_AUTHTYPE
OTA_PPP_AUTHNAME
– maps to TYPE=ADDRESS, PARM
NAME=PPP_AUTHNAME
OTA_PPP_AUTHSECRET
– maps to TYPE=ADDRESS, PARM
NAME=PPP_AUTHSECRET
OTA_PPP_LOGINTYPE
– maps to TYPE=ADDRESS, PARM
NAME=PPP_LOGINTYPE
OTA_PROXY –
maps to TYPE=ADDRESS, PARM NAME=PROXY
OTA_PROXY_TYPE
– maps to TYPE=ADDRESS, PARM
NAME=PROXY_TYPE
OTA_PROXY_AUTHNAME
– maps to TYPE=ADDRESS, PARM
NAME=PROXY_AUTHNAME
OTA_PROXY_AUTHSECRET
– maps to TYPE=ADDRESS, PARM
NAME=PROXY_AUTHSECRET
OTA_PROXY_LOGINTYPE
– maps to TYPE=ADDRESS, PARM
NAME=PROXY_LOGINTYPE
OTA_PORT –
maps to TYPE=ADDRESS, PARM NAME=PORT
OTA_CSD_DIALSTRING
– maps to TYPE=ADDRESS, PARM
NAME=CSD_DIALSTRING
OTA_CSD_CALLTYPE
– maps to TYPE=ADDRESS, PARM
NAME=CSD_CALLTYPE
OTA_CSD_CALLSPEED
– maps to TYPE=ADDRESS, PARM
NAME=CSD_CALLSPEED
OTA_ISP_NAME –
maps to TYPE=ADDRESS, PARM NAME=ISP_NAME
OTA_SMS_SMSC_ADDRESS
– maps to TYPE=ADDRESS, PARM
NAME=SMS_SMSC_ADDRESS
OTA_USSD_SERVICE_TYPE
– maps to TYPE=ADDRESS, PARM
NAME=USSD_SERVICE_TYPE
OTA_GPRS_ACCESSPOINTNAME
– maps to TYPE=ADDRESS, PARM
NAME=GPRS_ACCESSPOINTNAME
OTA_URL –
maps to TYPE=URL
OTA_MMSURL –
maps to TYPE=MMSURL
OTA_NAME –
maps to TYPE=NAME, PARM NAME=NAME
OTA_BOOKMARK_NAME
– maps to TYPE=BOOKMARK, PARM
NAME=NAME
OTA_BOOKMARK_URL
– maps to TYPE=BOOKMARK, PARM
NAME=URL
OTA_ID –
maps to TYPE=ID, PARM NAME=NAME
Note that the “Send WAP OTA
Settings” implementation in
the gateway “web menu”
interface uses this URL interface
to submit OTA setting parameters.
Viewing the source HTML for the corresponding
“web menu” interface pages
may provide an improved understanding
of this URL interface.
WAP Configuration OTA –
OTA Documents
It is also possible to provide OTA
configurations by creating one or
more OTA documents that contain settings
compatible with the Nokia/Ericsson
specification.
OTA documents should be created in
the OTA subdirectory of the gateway
installation, and given a file extension
of “.OTA”.
Once an OTA document has been created,
to send an OTA "Browser settings"
file to a mobile phone, use the following
URL format:
http://127.0.0.1:8800/?PhoneNumber=xxxxxxxx&OTA=filename
The "OTA" parameter specifies
the name of a file located in the
OTA subdirectory of the gateway with
a file extension of ".OTA".
For example, in the above sample URL,
the gateway would attempt to locate
a file named "filename.OTA"
in the OTA gateway subdirectory.
To send an OTA "Browser bookmarks"
file to a mobile phone, use the following
URL format:
http://127.0.0.1:8800/?PhoneNumber=xxxxxxxx&OTABookmark=filename
The "OTABookmark" parameter
uses the same format as the "OTA"
parameter when sending "Browser
settings", except that it expects
the browser bookmark settings file
to have a file extension of “.BM”.
An example OTA "Browser settings"
file is shown below, for additional
information, please refer to the Nokia/Ericsson
"Over The Air Settings Specification".
